Introduction This tutorial explains to you how to change the decoder IP in the system. On the screen of the decoder you can see/find the
Introduction This tutorial explains what to check in case you have problems with noise. First, take a look at the decoder screen: On the front
Introduction This tutorial explains what to check in case you have problems with transponders Myalps. First, take a look at the decoder screen: On the
Introduction This article talks about the prolific usb-2-com driver for the card reader. After an upgrade to Windows 10, it’s possible that the card reader
Introduction This article explains how to install and setup a signature pad in the software. Installation of the signature pad Connect the signature pad to
Introduction This tutorial explains how to troubleshoot the timing application when you have an active race and the passings are not showing in the software.
Introduction Is our system not responding when you are scanning a QR code? This is most likely due to a wrong configured/changed COM port configured
