Setting IP address Manually for the AMB Mylaps TranX:
In this tutorial, I will explain how to set manually IP address for the decoder AMB Maylaps TranX.
1-Run the following command on your cmd file on timing computer: Ipconfig;
2- After adding the decoder on devices, set the Ip address,
3-Add the IP address that you choose to the decoder,
4-Configure manually the Subnet mask and standard gateway.
5-For This example I configured the following on the decoder:
Decoder IP address: 10.1.14.250
Subnet mask: 255.255.255.0
Standard Gateway: 10.1.14.254
AMB Mylaps Tranx Decoder
You must log in to post a comment.