Brickelectric light control installation full tutorial:
You are here:
< All Topics
In this tutorial, I will explain how to install Brickelectric light control. The Installation includes configuration on the system,
This our light control:
How you should connect it (example):
In the software in Menu system > environment, devices put the following Ip address in the system
This IP is the static IP address,
If you would change to a different one follow these steps:
- Set the new IP address:
http://192.168.1.105/ipaddr=192.168.1.100
2. save the new IP address:
3. Reboot the light control
Don’t forget to change it in the system.
Brickelectric light control Manual
To test if the light control is connected use this tool.
byMessai>
You must log in to post a comment.