Setting IP address Manually for the AMB Mylaps TranX:

Categories

Setting IP address Manually for the AMB Mylaps TranX:

You are here:
  • Main
  • Timing
  • Setting IP address Manually for the AMB Mylaps TranX:
< All Topics

Introduction

In this tutorial, I will explain how to set manually IP address for the decoder AMB Maylaps TranX.

Configuration:

1-Run the following command on your cmd file on timing computer: Ipconfig;

2- After adding the decoder on devices, set the Ip address,

3-Add the IP address that you choose to the decoder,

4-Configure manually the Subnet mask and standard gateway.

5-For This example I configured the following on the decoder:

Decoder IP address: 10.1.14.250

Subnet mask: 255.255.255.0

Standard Gateway: 10.1.14.254

AMB Mylaps TranX decoder

AMB Mylaps Tranx Decoder

This site uses Akismet to reduce spam. Learn how your comment data is processed.

en English
X